Smithco Electrical Ltd, Essex NIC EIC Trustmark Government Endorsed Quality OZEV Approved Installer
Consumer Unit Upgrades: Why They Matter
Back to Blog

Consumer Unit Upgrades: Why They Matter

March 31, 2026
2 min read
By Safetech LTD

Still using an old fuse box? Discover why upgrading to a modern consumer unit is crucial for safety, compliance, and peace of mind.

Old Fuse Boxes vs Modern Consumer Units

Traditional fuse boxes use wire fuses that must be replaced when they blow. Modern consumer units use circuit breakers that can simply be reset and include RCD (Residual Current Device) protection that can save lives by cutting power in milliseconds if a fault is detected.

The Importance of RCD Protection

RCDs detect tiny current leakages and disconnect the power supply almost instantaneously—typically within 40 milliseconds. This rapid response can prevent fatal electric shocks and reduce fire risk. Modern regulations require RCD protection for most circuits in domestic properties.

Signs You Need an Upgrade

If you have rewireable fuses, a wooden fuse box, no RCD protection, or your fuse box is over 25 years old, it’s time for an upgrade. Frequent fuse blowing, a burning smell, or discolouration around the unit are urgent warning signs requiring immediate attention.

The Upgrade Process

A consumer unit replacement typically takes 4-6 hours. The electrician will isolate the power, remove the old unit, install the new consumer unit with appropriate circuit breakers and RCDs, test all circuits, and provide certification. Your power will be off during this work, so plan accordingly.

Cost Considerations

Consumer unit upgrades typically cost £400-£800 depending on property size and complexity. While this might seem expensive, it’s a crucial investment in safety and often increases property value. It’s also often required when selling a property or renting it out.

Certification and Compliance

All consumer unit upgrades must comply with BS 7671 wiring regulations (the IET Wiring Regulations). Your electrician should provide an Electrical Installation Certificate and notify Building Control. Always use a registered electrician to ensure compliance and safety.

Need Expert Electrical Services?

Our qualified electricians are here to help with all your electrical needs across East London & Essex.